Looking for the best vape subscription? Join Craft Premium today!
HOME / HARDWARE / VAPE ELITE STARTER KIT

Vape Elite Starter Kit - CRAFT VAPERY BUNDLES

Product large starterkit3 final
 
Vape Elite Starter Kit
CRAFT VAPERY BUNDLES VIEW ALL BY BRAND
$134.99
MEMBER PRICE $121.49
(0)
0 out of 5 stars
5 star
0
4 star
0
3 star
0
2 star
0
1 star
0
YOUR RATING
0 out of 5 stars
PRODUCT: Vape Elite Starter Kit
ADD TO CART
YOU WILL BE NOTIFIED WHEN THIS PRODUCT IS BACK IN STOCK
NOTIFY ME WHEN BACK IN STOCK

The Vape Elite Starter Kit was curated for intermediate vapers who have previously owned a personal vaporizer, or who have access to advanced vapers in their life that are more than happy to lend a helping hand. The Vape Elite Starter Kit gives you everything you need to vape the latest in starter kit technology, including a top-fill tank and powerful variable wattage box mod. The kit includes an IPV D3 Temperature Control box mod, an Aspire Triton 2 Sub-Ohm Tank, a single 18650 battery, and an additional 5-pack of Aspire Triton .4ohm replacement atomizers.

The IPV D3 has an impressive set of features and delivers up to 80W of output power. The mod is compatible with coils as low as 0.15ohms (in power mode) and 0.05ohms (in temperature mode). With its YiHi SX130-V2 chip on board, the IPV D3 boasts a new voltage step down function to deliver more consistent low voltage vaping while making a dramatic improvement to battery life when using the device at low voltage. The IPV D3 also features a temperature sensing (joule) mode for use with Ni200 or Grade 1 Ti wire, and allows for a temperature range of 200F to 580F and the on-board USB port does allow for pass-through charging while using the device. The LED screen displays battery life, atomizer resistance, wattage output (in wattage mode), and joules output / temperature settings (in joule mode). The device is also covered by a six month limited warranty from Pioneer4You.

The Vape Elite Startrer Kit also comes with Aspire’s latest stainless steel and Pyrex Triton 2 Sub-Ohm Tank. The tank features an innovative top-fill system that opens up all the way to allow for cleaner, easier filling, and screwing straight into the tank to eliminate leakage. The airflow system vastly increases airflow entering the tank and is fully adjustable. The secondary airflow system is located at the top of the collar of the tank, just under the drip tip. The new drip tip system further increases airflow and works to keep the drip tip cool (even when chain vaping), through the use of heat sinks. Finally, the Triton 2 Tank comes with a standard bore drip tip to handle all the extra vapor it creates.


IPV D3 Box Mod Features:

Billet aluminum alloy outer casing

Spring-loaded, self-adjusting 510 connection

Single 18650 battery

Voltage step down for low voltage vaping

YiHi SX130-V2 powered device

Temperature sensing technology measured in joules

Direct support for Ti wire types (with firmware upgrade)

OLED screen

Reverse polarity protection

Battery low voltage protection

Low resistance protection

Temperature overheat protection

Included Micro USB cable

Manufactured in China

Aspire Triton 2 Sub-Ohm Tank Features:

Pyrex 3.5ml tank

Dual adjustable air slots

Redesigned top-fill system

Heat-dissipative base design

Compatible with all Aspire Atlantis and Triton coils, as well as Atlantis/Triton gClapton coils from Atom Vapes, and Atlantis/Triton coils from SauceCode and UVAPER

Stainless steel construction

Standard 510 drip tip

One Aspire Triton 2 0.5ohm Clapton coil (preinstalled) - 40W to 45W

One additional 1.8ohm coil - 10W to 13W

One additional Pyrex glass tube

Additional 5-pack of .4ohm replacement atomizer coils

Manufactured in China

CUSTOMER REVIEWS

(0)
0 out of 5 stars
5 star
0
4 star
0
3 star
0
2 star
0
1 star
0
YOUR RATING
0 out of 5 stars
SUBMIT A REVIEW
Share your thoughts with other vapers!
Be the first to review this product.