The IPV3 LI 165W Temperature Control Box Mod is one of the most affordable, feature-packed temperature controlled box mods on the market today. With support for dual 18650 batteries (not included), temperature control with Ni200 or Ti wire, and an upgradeable chip (YiHi SX330V3SL), the Pioneer4You IPV3 LI Temperature Control 165W Box Mod seeks to be the only temperature controlling variable wattage mod you will ever need.
The IPV3 LI has an impressive set of features. The device delivers up to 165W of output power - enough to make any tank, RBA, or RDA produce massive flavor and vapor. Compatible with coils as low as 0.10ohms, this incredibly powerful device can deliver up to 30 Amps of sustained load. Thanks to its support for dual 18650 batteries (not included), the IPV3 boasts a massive battery life. With its YiHi SX330V3SL chip on board, the IPV3 LI also features a temperature sensing mode (joule mode) for use with Ni200 or Grade 1 Ti wire, and allows for a temperature range of 212F to 572F. Using the latest firmware from Pioneer4You, they have updated the IPV3 LI for direct support for Ti wire types, and also upped the maximum power to 200W!
Featuring an LED screen on the side of the device, a firing button, and two independent buttons to adjust the settings, the IPV3 LI has all the features you could want in a box mod. The LED screen displays battery life, atomizer resistance, wattage output (in wattage mode), and joules output and temperature settings (in joule mode). The spring-loaded center pin is self-adjusting, making just about any atomizer with a 510 connection work without extra adjustments. The device is also covered by a six month limited warranty.
The IPV3 LI 165W Box Mod is also firmware upgradeable by the end user to help make the device as futureproof as possible. The included USB cable is for firmware upgrades only and it should not be used to charge the device. More information can be found on Pioneer4You's website: http://www.pioneer4you.com.
- Billet aluminum alloy outer casing
- Tool-free battery cover
- Spring-loaded, self-adjusting 510 connection
- Micro USB cable included for firmware upgrades
- Dual 18650 battery support (not included)
- YiHi SX330V3SL powered device
- Independent up / down buttons for wattage / temperature adjustment
- Temperature sensing technology measured in joules
- Direct support for Ti wire types (with firmware upgrade)
- OLED screen
- Reverse polarity protection
- Battery low voltage protection
- Low resistance protection
- Temperature overheat protection
- Manufactured in China