The IPV D2 75W Temperature Control Box Mod is the latest and greatest temperature controlled mod from Pioneer4You, makers of the ever popular IPV3, IPV3 LI, and IPV4S devices. Packed with great features vapers have been requesting, the IPV D2 is one of the most affordable temperature controlled box mods on the market today. With support for a single 18650 battery (not included), temperature control with Ni200 or Ti wire, and an upgradeable chip (YiHi SX130H), the Pioneer4You IPV D2 75W Temperature Control Box Mod is the perfect pocket-friendly temperature controlling device for your vaping needs.
The IPV D2 has an impressive set of features. The device delivers up to 75W of output power - enough to make any tank, RBA, or RDA produce massive flavor and vapor. Compatible with coils as low as 0.2ohms (power mode) and 0.05ohms (temperature mode), this incredibly powerful device can deliver up to 30 Amps of sustained load. With its YiHi SX130H chip on board, the IPV D2 also features a temperature sensing mode (joule mode) for use with Ni200 or Grade 1 Ti wire, and allows for a temperature range of 200F to 580F. The IPV D2 comes with direct support for both Ni200 and Ti wire types straight out of the box. Unlike the previous IPV4, the on-board USB port does allow for pass-through charging while using the device.
Featuring an LED screen on the side of the device, a firing button, and two independent buttons to adjust the settings, the IPV D2 has all of the features you could want in a box mod. The LED screen displays battery life, atomizer resistance, wattage output (in wattage mode), and joules output / temperature settings (in joule mode). The spring-loaded center pin is self-adjusting, making just about any atomizer with a 510 connection work without extra adjustments. The battery door slides on and off and is held in place with a ball bearing to keep it nice and snug. The device is also covered by a six month limited warranty from Pioneer4You.
- Billet aluminum alloy outer casing
- Tool-free battery cover
- Spring-loaded, self-adjusting 510 connection
- Single 18650 battery support (not included)
- YiHi SX130H powered device
- Independent up / down buttons for wattage / temperature adjustment
- Temperature sensing technology measured in joules
- Direct support for Ti wire types (with firmware upgrade)
- OLED screen
- Reverse polarity protection
- Battery low voltage protection
- Low resistance protection
- Temperature overheat protection
- Included Micro USB cable
- Manufactured in China