Our customers often ask us to steer them into an affordable and powerful modding setup, to help them get the most out of their vaping experience. We've taken this one step further by curating these beautiful and affordable Ace Modding Essentials Starter Kits, to help intermediate vapers take the next step and move up to the world of advanced vaping! Each of our Ace Modding Essentials Starter Kits combines a powerful yet affordable mechanical mod with a Tugboat RDA, two 35A 18650 batteries, a charger, pre-wrapped coils, and organic Japanese cotton.
Our Copper Ace Modding Essentials Starter Kit comes with the following:
1 Ragnarök Mod by Vapour Life Style - Copper
1 Tugboat RDA by Flawless - Copper
2 LG HE2 IMR 18650 batteries
1 Nitecore Intellicharger i4
1 5-Pack of 26g Twisted Coils by Tradition Vapes
1 6-Pack of Organic Japanese Cotton Pads by Anarchist Cotton
Created to combat the ever increasing flood of cheap clones from China, the Ragnarök Mod is designed to deliver high quality and performance for under $100, while maintaining incredibly stylish looks. This 24mm copper mod is made from 99.99% pure red copper to deliver the highest possible conductivity, and comes with an 18350 tube and extension rings to accommodate 18500 and 18650 battery sizes. The top cap includes PEEK insulators and a manually-adjusting copper firing pin and battery length adjustment. The bottom assembly includes a spring-driven button beautifully engraved with the Ragnarök logo. The Ragnarök also features a reverse-threaded lockout ring to prevent unwanted firing. Each unit is serial numbered just above the lockout ring.
Ragnarök Mod Features:
- Copper top cap with PEEK insulators and manually-adjusting positive pins
- 1 copper 18350 tube
- 1 copper 18500 extension ring
- 1 copper 18650 extension ring
- Copper bottom assembly with engraved spring-driven button
- Collector’s box
- Made in Japan
The Tugboat RDA from Flawless has taken the market by storm. This triple post RDA comes with extra large air holes in a beautiful package, making it the perfect way to add a little personality to your favorite mod. Made from brushed copper and a 304 stainless steel deck, the Tugboat RDA features a reduced chamber with a deep juice well. The air holes are pre-drilled to 3/32” to provide amazing airflow right out of the box. Each one is engraved with an American flag, as well as the Tugboat logo and a serial number, and comes with a matching Delrin insulated polished stainless steel drip tip, also engraved with the Tugboat logo and serial number.
Tugboat RDA Features:
- Brushed copper top cap engraved with Tugboat logo and American flag
- 304 stainless steel triple post build deck with 510 connection and engraved serial number
- Brushed copper Delrin insulated drip tip with matching engravings
- Made in the USA
LG HE2 IMR 18650 Battery:
LG HE2 18650 batteries are 18mm batteries designed to fit 22-23mm tube mods and most 18650 box mods. These batteries have a high capacity of 2500mAh and can support a maximum load of 35A, making them perfect for low sub-ohm resistance vaping on your favorite mod.
LG HE2 IMR 18650 Li-MN Battery Specifications:
- Nominal Voltage: 3.7V
- Capacity: 2500mAh
- Peak Voltage: 4.2V
- Lowest Discharge: 2.50V
- Standard Charge: CC/CV (Max. Charging Rate 1.5A)
- Cycle Life: > 500 Cycles
- Continuous Max. Discharge Rate: 35A
Nitecore Intellicharger i4
The Intellicharger i4 is a universal, automatic smart-charger compatible with almost all types of rechargeable batteries, and is capable of charging four batteries simultaneously. Each of the four battery slots monitors and charges independently, and automatically identifies between Li-ion, Ni-MH, and Ni-Cd rechargeable batteries, which means you can use the slots with just about any rechargeable battery, not just your vaping batteries. Yellow and blue LEDs indicate the battery status and charging progress, and will flash when a battery is detected to be inserted incorrectly.
Nitecore Intellicharger i4 Specifications:
- Capable of charging four batteries simultaneously
- Each of the battery slots monitors and charges independently
- Compatible with and automatically identifies Li-ion / Li-MN batteries (26650, 22650, 18650, 18500, 18490, 18350, 17670, 17500, 16340, 14500, 10440)
- Compatible with and automatically identifies Ni-MH / Ni-Cd batteries (AA, AAA, AAAA, C)
- Optimized charging design for IMR batteries
- 3 charging modes (CC, CV, and Trickle charge)
- Automatically detects battery status and selects the appropriate voltage and charge mode
- 3 color LED displays charging progress for each battery
- Automatically stops charging when complete
- Features overcharge prevention to protect batteries
- Features temperature monitoring to protect from overheating
- Made from durable fire retardant / flame resistant ABS plastic
- Features reverse polarity protection
- Designed for optimal heat dissipation
- Certified by RoHS, CE, FCC, CEC, and KC
26g Twisted Coils
The hardest part of setting up an RBA is wrapping the coils. Sit back, relax, and let CRAFT do all the work for you with our pre-wrapped, pre-squeezed, and pre-torched Kanthal A-1 coils! These 26g Twisted Coils are wrapped from two strands of 26g Kanthal wire that are twisted together. Simply insert the coils into the post holes of your RBA, tighten the screws, and you are ready to vape! Our 26g Twisted Coils are rated at 0.5 ohms to provide a nice, warm vape with high vapor and flavor production. Each package comes with five pre-wrapped coils in a crush-proof tube.
Organic Japanese Cotton Pads
Organic Japanese Cotton is all the rage with vapers. It’s cleaner, more absorbent, and free of perfumes, dyes, and chemicals. These Organic Japanese Cotton Pads by Anarchist Cotton are ultra-absorbent, and the perfect size and density to provide a great cotton wick for vaping. Each pack contains six Organic Japanese Cotton Pads in a resealable plastic pouch.